Body Armour

Only one available at the moment in size Medium

Upper body protection for extreme mountain biking.

Fabric & Materials
Polycarbonate

Standards
CE approved (according to Personal
Protective Equipment directive
89/686/EEC)

Features
Low-profile shape specifically designed for the range of motion needs of bikers
Alternative Load Path TechnologyTM by Leatt ®
Engineered Collarbone cutout to help keep your helmet and brace away from one of your most fragile bones
Unique one piece rear support (thoracic) designed to break away in severe impact scenarios
Exclusive padding for biking
Removable & washable light weight Velcro padding
Adjustable sizing to fit riders

Model number 223740

The lightest CE approved neck brace for offroad riders.

Fabric & Materials
Carbon Fiber Matrix chassis

Standards
CE approved (according to Personal
Protective Equipment directive
89/686/EEC)

Features
Extra light construction
Alternative Load Path TechnologyTM by Leatt ®
Engineered Collarbone cutout to help keep your helmet and brace away from one of your most fragile bones
Unique one piece rear support (thoracic) designedto break away in severe impact scenarios.
Harness system with quick-release buckles
On-board rear thoracic angle adjustment
Removable & washable light weightVelcro-free padding
Adjustable sizing to fit riders

Model number 223738

Flexible back protection for extreme mountain biking.

THE VERTABRAE PROTECTIVE SYSTEM
Designed to follow the movements of the spine, the back panel designed with the Vertebrae Protective System is able to twist in 3 axes. The system allows for lateral, extension and compression movement without obstruction. It also ensures that the protector remains in its original position during riding to keep you continually protected.


Fabric & Materials
Hard plates in polypropylene
Internal light structure built with PC honey comb
Soft high absorbing structural layer

Standards
CE EN 1621-2

Features
d3o Technology
Exclusive SCOTT Vertebrae Protective plates system
Top plate designed with cut for full face helmet integration
Clavicle protections in d3o
Coccyx protection
Adjustable shoulder straps
Thoracic belt and hip belt
Compatible with the CRX extension for a larger fit (215845)

Model number 215451

Ultimate body armour from Scott for extreme mountain biking. 1300g total weight.

d3o Technology
d3o is a patented material with intelligent molecules. It flows with you as you move but look together on impact to absorb energy and protect you. d3o protectors allow for complete freedom of movement and mold to your body so you will not even feel like you are wearing a back protector. SCOTT CR Back Protectors feature SCOTT's unique 3D mesh back that increases breathability.

Fabric & Materials
Hard plates in polypropylene
Internal light structure built with PC honey comb
Soft high absorbing structural layer

Standards
CE EN 1621-2 (for the back protector)
and CE EN 1621-1 (for elbows and
shoulders protections)

Features
d3o Technology
Exclusive Scott Vertebrae Protective plates system
Top plate designed with cut for full face helmet integration
Adjustable shoulder caps
Adjustable elbows and forearms caps
Coccyx protection
Clavicle protections in d3oTM
Adjustable shoulder straps
Removable sleeves with zipper
Half-vest zip closure
Thoracic belt and hip belt
Thumb loop

Model number 215452

Just one exclusively available in Medium/Large until February.

Soft back protection for mountain biking from Scott, using d3o technology.
d3o is a patented material with intelligent molecules. It flows with you as you move but look together on impact to absorb energy and protect you. d3o protectors allow for complete freedom of movement and mold to your body so you will not even feel like you are wearing a back protector. SCOTT CR Back Protectors feature SCOTT's unique 3D mesh back that increases breathability.

Fabric & Materials
d3oTM back protector

Standards
CE EN 1621-2

Features
d3o Technology
Removable D3oTM back Protection
Breathable Mesh Back Panel
Removable, Adjustable shoulder straps
Adjustable Chest Belt and Elastic Hip Belt

Model number 220412

Technical compression top with elbow and shoulder pads for protection when mountain biking.

Fabric & Materials
Pads in d3oTM

Standards
CE EN 1621-1 (shoulder and elbow)

Features
d3o Technology
Removable soft and flexible elbow and shoulder protection in d3o TM
Compression lines to support muscles and generate more power and muscle energy
Breathable and confortable inner mesh on the back
Breathable mesh on elbows
Flatlock seams reducing chafing and skin irritation
Slim fit

Model number 222026

MTB compression top adding back protection to the elbow and shoulder pads of the Recruit.

Fabric & Materials
Pads in d3o

Standards
CE EN 1621-2 level 1 (back)
CE EN 1621-1 (shoulder and elbow)

Features
d3o Technology
Removable soft and flexible back protector in d3o TM
Removable soft and flexible elbow andshoulder protection in d3o TM
Compression lines to support muscles and generate more power and muscle energy
Breathable and confortable inner mesh on the back
Breathable mesh on elbows
Flatlock seams reducing chafing and skin irritation
Slim fit

Model number 223493

Mountain bike shorts with leg and hip protection.

Fabric & Materials
Shell: 80% polyester + 20% elasthan
Mesh: 80% polyester + 20% elasthan

Standards
CE directive 89/686/EEC

Features
6-panel anatomically shaped construction
Innovative soft articulated protections for legs and hips
Breathable mesh inserts
Silicon gripper at hem

Weight 300g

Model number 215454

Knee and shin pads for mountain bike protection.

Fabric & Materials
Hard plates in PE plastic
Soft padding material in polyethylene foam and EVA

Standards
CE EN 1621-1

Features
Knees and shins caps
‘Donut’ shaped padding on knee for an optimal fit
Removable ventilated shin guards
Adjustable straps
Compatible with your bike short
Mesh elastic band

Weight 250 g

Model number 210312

Knee pads for mountain bike or BMX protection.

Fabric & Materials
Vented neoprene
Front panel in Kevlar fabric
Plastic plate in PE
soft padding material in EVA

Standards
CE EN 1621-1

Features
Soft and flexible inner PE cup protection
‘Donut’ shaped inner padding on knee for an optimal fit
Localized side padding
Flexible and ergonomic 6-panel construction
Upper and lower elastic Velcro straps

Weight 300g

Model number 218843

Elbow and forearm protection for mountain biking.

Fabric & Materials
Hard plates in polypropylene
Soft padding in opened perforated polyethylene foam and EVA
Breathable mesh

Standards
CE EN 1621-1

Features
Elbow and forearms caps
‘Donut’ shaped padding on elbow for an optimal fit
Articulated protection for an easy bending
Adjustable straps
Mesh semi sleeve

Weight 250g

Model number 215453